Design Concepts

GMP™ Features:

• Positive displacement metering
• Drive cylinder with flow control valving and fluid pressure adjustable up to 3000 psi
• Modular concept to allow for system design and application
• Fixed ratio with quick ratio change in multiples from 1:1 to 20:1, depending on application
• Power drive can be air, hydraulic, or electric
• Smooth, continuous flow
• Only two wearing parts
• Ratio check and air purge valves
• Simple, accessible controls allow continuous flow or preset material shots

GMP™ Benefits:

• Precise ratios and metering
• Allows regulation of both fluid pressure and flow to application requirements
• Design capabilities enable use of a wide range of volumes and ratios
• Metering size and/or rates may be easily changed to suit ratios and shot volumes required
• Quick material check and positive air removal
• Safety and reduced wear; pressure only during application

Typical Applications

SINGLE COMPONENT DISPENSING

TWO COMPONENT DISPENSING & MIXING

*Note: Meters may be ganged for multi component materials or application points if required. A variety of dispenser head valves and controls are available to fit specific tasks either on production line or for portable applications.

RMP™ Features:

• Positive displacement metering
• Drive cylinder with flow control valving and fluid pressure adjustable up to 5000 psi
• Modular concept to allow for system design and application
• Fixed ratio with quick ratio change in multiples from 1:1 to 20:1
• Power drive can be air, hydraulic, or electric
• Low shear metering design
• Only two wearing parts
• Ratio check and air purge valves
• Simple, accessible controls allow continuous flow or preset material shots

RMP™ Benefits:

• Precise ratios and metering
• Allows regulation of both fluid pressure and flow to application requirements
• Design capabilities enable use of a wide range of volumes and ratios (Ex: 1cc to 1 gal per stroke)
• Metering rod diameters and/or stroke lengths may be easily changed to suit ratios and shot volumes required
• Enables system to handle shear sensitive materials: (Ex: glass balloons)
• Quick material check and positive air removal
• Safety and reduce wear; pressure only during application

Typical Applications

SINGLE COMPONENT DISPENSING

TWO COMPONENT DISPENSING & MIXING

*Note: Meters may be ganged for multi component materials or application points if required. A variety of dispenser head valves and controls are available to fit specific tasks either on production line or for portable applications.