• Standard hose for AST contractor units
• Teflon core, stainless steel braided on outside
• 3/8" ID x 15’, 6 JIC Swivel Ends

Pushbutton Switch, SPST, MOMENTARY, N / O, #6-32. Switch used for GMP-025 & GMP-050 Manual series. Lever acting actuator for push button switch. Actuator used for GMP-025 & GMP-050 Manual series.

• Mixer Assembly, Static Spray, Air Atomizing
• 3/8" Mixer x 24 Element
• Quantity: 1

HOSE, HYDRAULIC, SYNTHETIC CORE, 3000 PSI, 3/4 ID x 15’ LONG

• Lubricant grease recommended for all AST units
• Petrolatum Grease, 14 oz. grease tubes
• Sold in sets of 6 tubes per order

• Static Mixer
• 1/4" x 24 Element
• Approx. 7.375" in length
• Uses 11189-06 or 22768-06A mixer nut (nut sold separately)
• Sold in packs of 50

• Static Mixer
• 1/2" - 3/8" Dual Stage x 44 Element
• Approx. 19.65" in Length
• Uses 11189-08 or 22768-08A mixer nut (nut sold separately)
• Sold in packs of 12

Flourocarbon seal used in AST Gear Metering Pumps. Seal is a part of 55528-07A repair kit. • 3/4" I.D. • 3/16" Cross Section

• Timing belt pulleys for older model GMP units
• Standard timing belts for other uses.
• Color: black, unless otherwise indicated.
• Dimensions: 3/8" Pitch, Trade Size 322L, 32.25" Wrap Length, 3/4" Wide

• Drive Chain for GMP-050
• No 40 Steel, 1/2 Pitch, Roller, 3.25 Feet.

• Plastic Polypropylene Mixer Nut
• Nut used for 3/8" Static Mixers
• Thread size: 7/8"-9
• Quantity of 10 per bag

• Timing belt pulleys for older model GMP units
• Standard timing belts for other uses.
• Color: black, unless otherwise indicated.
• Dimensions: 3/8" Pitch, Trade Size 390L, 39" Wrap Length, 3/4" Wide

• Aluminum Mixer Nut
• Nut used for 1/2" Static Mixers
• Thread size: 7/8"-9
• Quantity: 5 per bag

• Pump repair kit for all AST GMP pumps
• (2) FLOUROCARBON SEALS
• (1) O-RING, 1-026, EP
• (1) O-RING, 1-035, EP
• (3) O-RING, 1-039 EP
• (1) GREASE ZERK, 45 DEGREE
• (1) GREASE ZERK, BUNA SEAL, 30 DEGREE

INLET, GEROTOR PUMP, TOP FEED, GMP, ALUMINUM

• Large Steel Mixer Nut
• Nut used for 3/4" Static Mixers
• Thread size: 1-5/16"-12
• Quantity: 5 per bag

MANIFOLD, DUAL PORT (.100 & .100), 1/8 NPT ZERK PORTS

• Two Port Manifold, .100" Dia. Holes
• Includes (2) 1/8" NPT Grease Zerks

The GMP Cartridge Fill Manifold Assembly Kit allows for users to attach & use their GMP-025 & GMP-050 for manual filling of side by side dual cartridges.

• Fits GMP-025 units & manual GMP-050 units
• Attach JIC hose adapters to manifold assembly block

• Mixer sleeve for 1/2" Static Mixers
• Works for both 30 & 32 element mixers
• Thread size: 7/8"-9
• Approx. 13.25" L

• Standard Pump for GMP Contractor units
• Gerotor, 0.594 cu. in./rev, Luber, Extended Shaft

Pushbutton Switch, SPST, MOMENTARY, N / O, #6-32. Switch used for GMP-025 & GMP-050 Manual series. Lever acting actuator for push button switch. Actuator used for GMP-025 & GMP-050 Manual series.

• Static Mixer
• 1/2" x 30 Element
• Just over 14" in length
• Uses 11189-08 or 22768-08A mixer nut (nut sold separately)
• Sold in packs of 50

MANIFOLD, DUAL PORT (.100 & .100), 1/8 NPT ZERK PORTS, 3/8" NPT

• 3/8" NPT
• Two Port Manifold, .100" Dia. Holes
• Includes (2) 1/8" NPT Grease Zerks

• Desiccant cartridge for AST contractor units
• Disposable Desiccant Cartridge dries displacement air entering storage drums to -100° F dewpoint
• Prevents condensation of water vapor and resulting contamination (indicator window turns from blue to pink when the cartridge is exhausted)