• Mixer Assembly, Static Spray, Air Atomizing
• 3/8" Mixer x 24 Element
• Quantity of 5 per Bag

The GMP Cartridge Fill Manifold Assembly Kit allows for users to attach & use their GMP-025 & GMP-050 for manual filling of side by side dual cartridges.

• Fits GMP-025 units & manual GMP-050 units
• Attach JIC hose adapters to manifold assembly block

Pushbutton Switch, SPST, MOMENTARY, N / O, #6-32. Switch used for GMP-025 & GMP-050 Manual series. Lever acting actuator for push button switch. Actuator used for GMP-025 & GMP-050 Manual series.

Union, 9/16-18 SAE x 1/4 F NPT -- Union for 55696-01C Dispense Manifold

• Static Mixer
• 1/2" x 24 Element
• Just over 11.5" in length
• Uses 11189-08 or 22768-08A mixer nut (nut sold separately)
• Sold in packs of 50

• Mixer sleeve for 1/2" Static Mixers
• Works for both 30 & 32 element mixers
• Thread size: 7/8"-9
• Approx. 13.25" L

• SEAL, WIPER, FOLLOWER PLATE, 5 GALLON
• 1/4" THICK
• EP

• Repair kit for 55696-01C Dispense Manifold
• Kit contains (2) compression springs, (2) balls, (2) UHMW seats, (2) O-Rings and (2) #6 JIC Adaptors

• Standard Pump for GMP Contractor units
• Gerotor, 0.594 cu. in./rev, Luber, Extended Shaft

• Aluminum Mixer Nut
• Nut used for 1/2" Static Mixers
• Thread size: 7/8"-9
• Quantity: 5 per bag

• Lubricant grease recommended for all AST units
• Petrolatum Grease, 14 oz. grease tubes

• Static Mixer
• 3/8" x 32 Element
• Just under 14" in length
• Uses 11189-06 or 22768-06A mixer nut (nut sold separately)
• Sold in packs of 50

• Repair Kit for 56137 Valve
• Contains O-rings, Packing Sets & Seats for both valve side
  • 10 O-Rings
  • 2 Packing Sets
  • 2 Seats

• Automatic Dispense Valve
• UHMW Packings
• Includes 2-port manifold

• Timing belt pulleys for older model GMP units
• Standard timing belts for other uses.
• Color: black, unless otherwise indicated.
• Dimensions: 3/8" Pitch, Trade Size 345L, 34.5" Wrap Length, 3/4" Wide

• Static Mixer
• 3/4" x 32 Element
• 24.5" in Length
• 0.98" Outside Dia.
• Uses 23961 mixer nut (nut sold separately)
• Sold in packs of 12

• Pump repair kit for all AST GMP pumps
• (2) FLOUROCARBON SEALS
• (1) O-RING, 1-026, EP
• (1) O-RING, 1-035, EP
• (3) O-RING, 1-039 EP
• (1) GREASE ZERK, 45 DEGREE
• (1) GREASE ZERK, BUNA SEAL, 30 DEGREE

MANIFOLD, DUAL PORT, 1/2 DCP VALVE, 7/8-9 BELL, (3/16 PORTS), 1/8 NPT ZERK PORTS

• Two Port Manifold, .3/16" Dia. Holes
• Includes (2) 1/8" NPT Grease Zerks

• Standard hose for AST contractor units
• Teflon core, stainless steel braided on outside
• 3/8" ID x 15’, 6 JIC Swivel Ends

• Large Steel Mixer Nut
• Nut used for 3/4" Static Mixers
• Thread size: 1-5/16"-12
• Quantity: 5 per bag

• Pump repair kit for all AST GMP pumps
• (2) FLOUROCARBON SEALS
• (1) O-RING, 1-026, EP
• (1) O-RING, 1-035, EP
• (3) O-RING, 1-039 EP
• (1) GREASE ZERK, 45 DEGREE
• (1) GREASE ZERK, BUNA SEAL, 30 DEGREE

• Mixer Assembly, Static Spray, Air Atomizing
• 3/8" Mixer x 24 Element
• Quantity: 1

• Grease gun to dispense lubricant grease recommended for all AST units
• Gun for 14 oz. grease tubes

• Static Mixer
• 1/2" x 30 Element
• Just over 14" in length
• Uses 11189-08 or 22768-08A mixer nut (nut sold separately)
• Sold in packs of 50

Flourocarbon seal used in AST Gear Metering Pumps. Seal is a part of 55528-07A repair kit. • 3/4" I.D. • 3/16" Cross Section

• Shaft, Gerotor Pump
• .59 Cu. In. / Rev.
• Single Element, Extended
• 6.210" Length