• Standard hose for AST contractor units
• Teflon core, stainless steel braided on outside
• 3/8" ID x 15’, 6 JIC Swivel Ends

• Pump repair kit for all AST GMP pumps
• (2) FLOUROCARBON SEALS
• (1) O-RING, 1-026, EP
• (1) O-RING, 1-035, EP
• (3) O-RING, 1-039 EP
• (1) GREASE ZERK, 45 DEGREE
• (1) GREASE ZERK, BUNA SEAL, 30 DEGREE

• Timing belt pulleys for older model GMP units
• Standard timing belts for other uses.
• Color: black, unless otherwise indicated.
• Dimensions: 3/8" Pitch, Trade Size 390L, 39" Wrap Length, 3/4" Wide

• Desiccant cartridge for AST contractor units
• Disposable Desiccant Cartridge dries displacement air entering storage drums to -100° F dewpoint
• Prevents condensation of water vapor and resulting contamination (indicator window turns from blue to pink when the cartridge is exhausted)

MANIFOLD, DUAL PORT, 1/2 DCP VALVE, 7/8-9 BELL, (3/16 PORTS), 1/8 NPT ZERK PORTS

• Two Port Manifold, .3/16" Dia. Holes
• Includes (2) 1/8" NPT Grease Zerks

The GMP Cartridge Fill Manifold Assembly Kit allows for users to attach & use their GMP-025 & GMP-050 for manual filling of side by side dual cartridges.

• Fits GMP-025 units & manual GMP-050 units
• Attach JIC hose adapters to manifold assembly block

• Repair Kit for 55656 series Single Component Valve
• Contains O-rings, Packing Set & Seat for valve

• Static Mixer
• 3/8" x 32 Element
• Just under 14" in length
• Uses 11189-06 or 22768-06A mixer nut (nut sold separately)
• Sold in packs of 50

• Pump repair kit for AST RMP-24, 1-1/16" Dia. Rod pumps
• (1) UHMW SEAL
• (1) POLYURETHANE SEAL
• (1) O-RING, 1-032, EP
• (1) TEFLON PACKING SET (1 M, 1 F, 3 V)

• Shaft, Gerotor Pump
• .59 Cu. In. / Rev.
• Single Element, Extended
• 6.210" Length

• Static Mixer
• 1/2" - 3/8" Dual Stage x 44 Element
• Approx. 19.65" in Length
• Uses 11189-08 or 22768-08A mixer nut (nut sold separately)
• Sold in packs of 12

Pushbutton Switch, SPST, MOMENTARY, N / O, #6-32. Switch used for GMP-025 & GMP-050 Manual series. Lever acting actuator for push button switch. Actuator used for GMP-025 & GMP-050 Manual series.

• SEAL, WIPER, FOLLOWER PLATE, 5 GALLON
• 3/8" THICK
• POLYESTER REINFORCED EP

Flourocarbon seal used in AST Gear Metering Pumps. Seal is a part of 55528-07A repair kit. • 3/4" I.D. • 3/16" Cross Section

• Static Mixer
• 1/2" x 30 Element
• Just over 14" in length
• Uses 11189-08 or 22768-08A mixer nut (nut sold separately)
• Sold in packs of 50

HOSE, HYDRAULIC, SYNTHETIC CORE, 3000 PSI, 3/4 ID x 15’ LONG

• Timing belt pulleys for older model GMP units
• Standard timing belts for other uses.
• Color: black, unless otherwise indicated.
• Dimensions: 3/8" Pitch, Trade Size 322L, 32.25" Wrap Length, 3/4" Wide

• Timing belt pulleys for older model GMP units
• Standard timing belts for other uses.
• Color: black, unless otherwise indicated.
• Dimensions: 3/8" Pitch, Trade Size 345L, 34.5" Wrap Length, 3/4" Wide

• Plastic Polypropylene Mixer Nut
• Nut used for 1/2" Static Mixers
• Thread size: 7/8"-9
• Quantity: 10 per bag

• Mixer sleeve for 1/2" Static Mixers
• Works for both 30 & 32 element mixers
• Thread size: 7/8"-9
• Approx. 13.25" L

• Lubricant grease recommended for all AST units
• Petrolatum Grease, 14 oz. grease tubes
• Sold in sets of 6 tubes per order