Name: 55798B - Single Component Dispense Valve Kit, 1/4 SCP, 55656 Series
SKU: 55798B
Price: 75.50 USD
Availability: InStock

23675A – GMP Inlet Block, Top Feed

INLET, GEROTOR PUMP, TOP FEED, GMP, ALUMINUM

$159.85 Add to cart

23961 – NUT, MIXER RETAINING, 1-5/16-12 (Quantity of 5)

Large Steel Mixer Nut
Nut used for 3/4" Static Mixers
Thread size: 1-5/16"-12
Quantity: 5 per bag

$117.50 Add to cart

33421 – Grease, 14 oz. tubes (Qty. of 6)

Lubricant grease recommended for all AST units
Petrolatum Grease, 14 oz. grease tubes
Sold in sets of 6 tubes per order

$126.00 Add to cart

22560-02 – 5 Gal. Smart Pump Wiper Seal, 1/4″

SEAL, WIPER, FOLLOWER PLATE, 5 GALLON
1/4" THICK
EP

$79.90 Add to cart

55991-01C-U – Valve Assembly, 1/4 DCP w/UHMW Packings, -01 2-Port Manifold

Automatic Dispense Valve
UHMW Packings
Includes 2-port manifold

$1,690.00 Add to cart

56482 – GMP Cartridge Fill Manifold Assembly Kit

The GMP Cartridge Fill Manifold Assembly Kit allows for users to attach & use their GMP-025 & GMP-050 for manual filling of side by side dual cartridges.

Fits GMP-025 units & manual GMP-050 units
Attach JIC hose adapters to manifold assembly block

$497.00 Add to cart

11081-8644 – Static Mixers, Dual Stage, 1/2-3/8 x 44 Element (Qty. of 12)

Static Mixer
1/2" - 3/8" Dual Stage x 44 Element
Approx. 19.65" in Length
Uses 11189-08 or 22768-08A mixer nut (nut sold separately)
Sold in packs of 12

$114.00 Add to cart

23961 – NUT, MIXER RETAINING, 1-5/16-12 (Quantity of 2)

Large Steel Mixer Nut
Nut used for 3/4" Static Mixers
Thread size: 1-5/16"-12
Quantity: 2 per bag

$51.00 Add to cart

55969-02C – Spray Mixer Assembly, 3/8″ Mixer, 24 Element

Mixer Assembly, Static Spray, Air Atomizing
3/8" Mixer x 24 Element
Quantity: 1

$20.05 Add to cart

55699B – KIT, VALVE REPAIR, 1/2 SCP, HEX LUBER, (55655B&C)

Repair Kit for 55655B & C Valve
Contains O-rings, Packing Sets & Seats for both valve side
- 4 O-Rings
- 1 Packing Set
- 1 Seat

$84.10 Add to cart

Manifold-for-Automatic-55991-Valve_23646-01B

23646-01B – Manifold for Automatic 55991 Valve

MANIFOLD, DUAL PORT (.100 & .100), 1/8 NPT ZERK PORTS

Two Port Manifold, .100" Dia. Holes
Includes (2) 1/8" NPT Grease Zerks

$295.00 Add to cart

11081-1232 – Static Mixers, 3/4″ x 32 ELEMENT (Qty. of 12)

Static Mixer
3/4" x 32 Element
24.5" in Length
0.98" Outside Dia.
Uses 23961 mixer nut (nut sold separately)
Sold in packs of 12

$359.00 Add to cart

23515 – Adaptor, Seal Retaining, Gerotor

Pushbutton Switch, SPST, MOMENTARY, N / O, #6-32. Switch used for GMP-025 & GMP-050 Manual series. Lever acting actuator for push button switch. Actuator used for GMP-025 & GMP-050 Manual series.

$67.15 Add to cart

56691 – GMP PUMP

Standard Pump for GMP Contractor units
Gerotor, 0.594 cu. in./rev, Luber, Extended Shaft

$1,485.00 Add to cart

11081-1223 – Static Mixers, 3/4″ x 23 ELEMENT (Qty. of 12)

Static Mixer
3/4" x 23 Element
17" in Length
Uses 23961 mixer nut (nut sold separately)
Sold in packs of 12

$288.00 Add to cart

55953A-U – KIT, VALVE REPAIR, 1/2” D.C.P., UHMW PACKINGS

Repair Kit for 56137 Valve
Contains O-rings, Packing Sets & Seats for both valve side
- 10 O-Rings
- 2 Packing Sets
- 2 Seats

$101.95 Add to cart

11019-345 – Timing Belt, 3/8″ Pitch, 3/4″ x 34.5″ L

Timing belt pulleys for older model GMP units
Standard timing belts for other uses.
Color: black, unless otherwise indicated.
Dimensions: 3/8" Pitch, Trade Size 345L, 34.5" Wrap Length, 3/4" Wide

$44.40 Add to cart

33421 – Grease, 14 oz. tube

Lubricant grease recommended for all AST units
Petrolatum Grease, 14 oz. grease tubes

$22.50 Add to cart

55696-01C – GMP Manual Dispense Manifold

Complete Dispense Manifold for GMP-025 & manual GMP-050
Manifold Assy's, 7/8-9, Internal Ball, .100 Ports, No. 6 w/Ball Valve.

$310.00 Add to cart

56451-01 – KIT, VALVE REPAIR, 1/4” DCP SNUFF-BACK, UHMW OUTLET SEALS, (56450-01)

Repair Kit for 56450-01 series Double Component Valve
Contains O-rings, Bronze Bushings, Packing Set & Seals for valve

$122.25 Add to cart

11019-322 – Timing Belt, 3/8″ Pitch, 3/4″ x 32.25″ L

Timing belt pulleys for older model GMP units
Standard timing belts for other uses.
Color: black, unless otherwise indicated.
Dimensions: 3/8" Pitch, Trade Size 322L, 32.25" Wrap Length, 3/4" Wide

$38.55 Add to cart

13594 – BUSHING FOR GMP PUMP

TEFLON LINED STEEL BUSHING, 3/4 ID, 7/8 OD x 3/4 L

$26.50 Add to cart

23826-01A – Manifold for 1/2″ Automatic 56137 Valve

MANIFOLD, DUAL PORT, 1/2 DCP VALVE, 7/8-9 BELL, (3/16 PORTS), 1/8 NPT ZERK PORTS

Two Port Manifold, .3/16" Dia. Holes
Includes (2) 1/8" NPT Grease Zerks

$295.00 Add to cart

14251 – VALVE, BALL, FULL THROAT, 1 F NPT , CHROME-PLATED BRASS, 600 PSI

Flourocarbon seal used in AST Gear Metering Pumps. Seal is a part of 55528-07A repair kit. • 3/4" I.D. • 3/16" Cross Section

$120.95 Add to cart

11299-15 – Material Hose, 15′ x 3/8″ Dia.

Standard hose for AST contractor units
Teflon core, stainless steel braided on outside
3/8" ID x 15’, 6 JIC Swivel Ends

$242.85 Add to cart

11081-824 – Static Mixers, 1/2″ x 24 ELEMENT (Qty. of 50)

Static Mixer
1/2" x 24 Element
Just over 11.5" in length
Uses 11189-08 or 22768-08A mixer nut (nut sold separately)
Sold in packs of 50

$155.00 Add to cart

13357A – Grease Gun, 14 oz Tube Size, w/Hose

Grease gun to dispense lubricant grease recommended for all AST units
Gun for 14 oz. grease tubes

$72.95 Add to cart

12914 – Pump Shaft Retaining Ring

RING, RETAINING, 3/4, EXTERNAL, LOW-CLEARANCE C-STYLE, STAINLESS

$8.96 Add to cart

12637-12 – SEAL FOR GMP PUMP

Flourocarbon seal used in AST Gear Metering Pumps. Seal is a part of 55528-07A repair kit. • 3/4" I.D. • 3/16" Cross Section

$30.65 Add to cart

25831-830 – SLEEVE/SHROUD, MIXER SUPPORT, 1/2 ID MIXER, 30-32 ELEMENT

Mixer sleeve for 1/2" Static Mixers
Works for both 30 & 32 element mixers
Thread size: 7/8"-9
Approx. 13.25" L

$269.90 Add to cart

MIXER RETAINING, 7/8-9, 11/16 ID, ALUMINUM 22768-08A

22768-08A – NUT, MIXER RETAINING, 7/8-9, 11/16 ID, ALUMINUM (Qty. of 5)

Aluminum Mixer Nut
Nut used for 1/2" Static Mixers
Thread size: 7/8"-9
Quantity: 5 per bag

$145.00 Add to cart

11081-830 – Static Mixers, 1/2″ x 30 ELEMENT (Qty. of 50)

Static Mixer
1/2" x 30 Element
Just over 14" in length
Uses 11189-08 or 22768-08A mixer nut (nut sold separately)
Sold in packs of 50

$155.00 Add to cart

55691-02 – Manual Dispense Manifold Repair Kit w/Zerks

Repair kit for 55696-01C Dispense Manifold
Kit contains (2) compression springs, (2) balls, (2) UHMW seats, (2) O-Rings and (2) grease zerks

$64.90 Add to cart

55528-07A – GMP Pump Repair Kit

$76.50 Add to cart

26665-01 – Dual Manifold for Auto 55991 Valve, 3/8″ NPT

MANIFOLD, DUAL PORT (.100 & .100), 1/8 NPT ZERK PORTS, 3/8" NPT

3/8" NPT
Two Port Manifold, .100" Dia. Holes
Includes (2) 1/8" NPT Grease Zerks

$325.00 Add to cart

11019-390 – Timing Belt, 3/8″ Pitch, 3/4″ x 39″ L

Timing belt pulleys for older model GMP units
Standard timing belts for other uses.
Color: black, unless otherwise indicated.
Dimensions: 3/8" Pitch, Trade Size 390L, 39" Wrap Length, 3/4" Wide

$47.45 Add to cart

56438-01 – DROP TUBE ASSEMBLY, 3/8 X 14 TUBE, No. 6 TANK RETURN

Pushbutton Switch, SPST, MOMENTARY, N / O, #6-32. Switch used for GMP-025 & GMP-050 Manual series. Lever acting actuator for push button switch. Actuator used for GMP-025 & GMP-050 Manual series.

$44.50 Add to cart

12905A & 12718 – Pushbutton Switch & Lever Acting Actuator Dual Pack

Pushbutton Switch, SPST, MOMENTARY, N / O, #6-32. Switch used for GMP-025 & GMP-050 Manual series. Lever acting actuator for push button switch. Actuator used for GMP-025 & GMP-050 Manual series.

$84.95 Add to cart

55691-01 – Manual Dispense Manifold Repair Kit w/Adaptors

Repair kit for 55696-01C Dispense Manifold
Kit contains (2) compression springs, (2) balls, (2) UHMW seats, (2) O-Rings and (2) #6 JIC Adaptors

$79.30 Add to cart

55776C – KIT, VALVE REPAIR, 1/4 DCP, 55991-XX REV B & C

Repair Kit for 55991-01C Valve
Contains O-rings, Packing Sets & Seats for both valve side

$125.75 Add to cart

11081-424 – Static Mixers, 1/4″ x 24 ELEMENT (Qty. of 50)

Static Mixer
1/4" x 24 Element
Approx. 7.375" in length
Uses 11189-06 or 22768-06A mixer nut (nut sold separately)
Sold in packs of 50

$100.00 Add to cart

15201-15 – Hydraulic Material Hose, 3/4″ ID x 15′, 1000 PSI

HOSE, HYDRAULIC, SYNTHETIC CORE, 3000 PSI, 3/4 ID x 15’ LONG

$268.45 Add to cart

55776B-U – Auto Dispense Valve Kit, 1/4 DCP, 55991-XXB-U & C-U

Repair Kit for 55991-01C-U Valve
Contains O-rings, Packing Sets & Seats for both valve side

$90.05 Add to cart

12046 – Desiccant Canister

Desiccant cartridge for AST contractor units
Disposable Desiccant Cartridge dries displacement air entering storage drums to -100° F dewpoint
Prevents condensation of water vapor and resulting contamination (indicator window turns from blue to pink when the cartridge is exhausted)

$46.95 Add to cart