MANIFOLD, DUAL PORT, 1/2 DCP VALVE, 7/8-9 BELL, (3/16 PORTS), 1/8 NPT ZERK PORTS

• Two Port Manifold, .3/16" Dia. Holes
• Includes (2) 1/8" NPT Grease Zerks

INLET, GEROTOR PUMP, TOP FEED, GMP, ALUMINUM

• Large Steel Mixer Nut
• Nut used for 3/4" Static Mixers
• Thread size: 1-5/16"-12
• Quantity: 2 per bag

Pushbutton Switch, SPST, MOMENTARY, N / O, #6-32. Switch used for GMP-025 & GMP-050 Manual series. Lever acting actuator for push button switch. Actuator used for GMP-025 & GMP-050 Manual series.

• Lubricant grease recommended for all AST units
• Petrolatum Grease, 14 oz. grease tubes

• Timing belt pulleys for older model GMP units
• Standard timing belts for other uses.
• Color: black, unless otherwise indicated.
• Dimensions: 3/8" Pitch, Trade Size 322L, 32.25" Wrap Length, 3/4" Wide

• Drive Chain for GMP-050
• No 40 Steel, 1/2 Pitch, Roller, 3.25 Feet.

MANIFOLD, DUAL PORT (.100 & .100), 1/8 NPT ZERK PORTS

• Two Port Manifold, .100" Dia. Holes
• Includes (2) 1/8" NPT Grease Zerks

Pushbutton Switch, SPST, MOMENTARY, N / O, #6-32. Switch used for GMP-025 & GMP-050 Manual series. Lever acting actuator for push button switch. Actuator used for GMP-025 & GMP-050 Manual series.

Flourocarbon seal used in AST Gear Metering Pumps. Seal is a part of 55528-07A repair kit. • 3/4" I.D. • 3/16" Cross Section

The GMP Cartridge Fill Manifold Assembly Kit allows for users to attach & use their GMP-025 & GMP-050 for manual filling of side by side dual cartridges.

• Fits GMP-025 units & manual GMP-050 units
• Attach JIC hose adapters to manifold assembly block

• Shaft, Gerotor Pump
• .59 Cu. In. / Rev.
• Single Element, Extended
• 6.210" Length

• Pump repair kit for all AST GMP pumps
• (2) FLOUROCARBON SEALS
• (1) O-RING, 1-026, EP
• (1) O-RING, 1-035, EP
• (3) O-RING, 1-039 EP
• (1) GREASE ZERK, 45 DEGREE
• (1) GREASE ZERK, BUNA SEAL, 30 DEGREE

Union, 9/16-18 SAE x 1/4 F NPT -- Union for 55696-01C Dispense Manifold

• SEAL, WIPER, FOLLOWER PLATE, 5 GALLON
• 1/4" THICK
• EP

• Grease gun to dispense lubricant grease recommended for all AST units
• Gun for 14 oz. grease tubes

• Desiccant cartridge for AST contractor units
• Disposable Desiccant Cartridge dries displacement air entering storage drums to -100° F dewpoint
• Prevents condensation of water vapor and resulting contamination (indicator window turns from blue to pink when the cartridge is exhausted)

• Lubricant grease recommended for all AST units
• Petrolatum Grease, 14 oz. grease tubes
• Sold in sets of 6 tubes per order

• Mixer sleeve for 1/2" Static Mixers
• Works for both 30 & 32 element mixers
• Thread size: 7/8"-9
• Approx. 13.25" L

RING, RETAINING, 3/4, EXTERNAL, LOW-CLEARANCE C-STYLE, STAINLESS

• Repair Kit for 55656 series Single Component Valve
• Contains O-rings, Packing Set & Seat for valve

• Large Steel Mixer Nut
• Nut used for 3/4" Static Mixers
• Thread size: 1-5/16"-12
• Quantity: 5 per bag

• Aluminum Mixer Nut
• Nut used for 3/8" Static Mixers
• Thread size: 7/8"-9
• Quantity: 5 per bag

Flourocarbon seal used in AST Gear Metering Pumps. Seal is a part of 55528-07A repair kit. • 3/4" I.D. • 3/16" Cross Section