- Start Up & Shut Down for VIP
Start-Up
- Check level of materials in containers, making sure level is always over 1/3 filled.
- Clean off applicator dispense head after removing plastic mixer nozzle. Trigger applicator into waste container to verify smooth, air free flow of both materials. Wipe head clean and coat head with compatible lubricant.
- Place new plastic mixer nozzle on applicator block and secure with retainer nut. NOTE: For some high pressure and high flow rate systems, a mixer retaining housing may be required to avoid cracking plastic mixers.
Shut-Down
- Turn off main air supply or disconnect it.
- Remove plastic mixer nozzle.
- Trigger applicator to relieve any pressure in lines or system.
- Clean head of applicator and coat with compatible lubricant.
